• Overview
• Manual Slack Adjusters (MSA)
•    How slack adjusters work
•    Product Catalogue
•    Installation & Removal
•    Replacement
•    Failure Analysis
•    Preventive Maintenance
• Automatic Slack Adjusters (ASA)
• Components of Slack Adjusters

Brake Adjuster Replacement

When replacing a brake adjuster, it is recommended that the replacement be of the same size as the original equipment.

Arm length (centre of spline to centre of arm hole to be used)Type, width, number, and diameter of splines. Clevis pin diameter (do not drive out bushing to accommodate a larger clevis pin. Brake chamber push rod size (5⁄8" or 1⁄2")

If offset configuration, determine the offset dimension (right or left side)

 

©Copyright 2005 -2006 Madras Engineering Industries Ltd.